Tempdrop Battery Replacement Guide (C)
Please note: Once the sensor is opened, any stored data will be erased so be sure to sync before replacing your battery.
Changing the battery mid-cycle will not affect your temp results.
What you need
|Battery||Tempdrop uses an inexpensive CR2032 3V lithium coin cell battery. It can be purchased on Amazon or at any store with coin cell type (watch) batteries.|
Every Tempdrop ships with a wand to help replace the battery. Alternatively, you can these tools online by searching for an "spudger opening tool." (see example below)
Warning: Do not use a metal tool- this can cause damage and void the warranty
1.Gently use the tool to separate the front and back sides of the Tempdrop sensor according to the indication arrows.
2. Note how your battery is placed before removing. Remove old battery and slide new battery under metal disc. Ensure your battery is removed and inserted the correct way. DO NOT BEND METAL DISC.
3. Before you reassemble the Tempdrop sensor, make sure that the inner frame arm is clicked down into the bottom shell as indicated below.
4. In order to close the sensor, hold the wider, bottom part as shown and use your other hand to click the two shells together around the edge. Don't press in the middle of the sensor. You should hear a click.
If you see a gap between the 2 halves, reopen and check the inner frame as outlined in step 3 or reach out to support for more help.
Any questions? Contact Support